BWDRW - E-67S (FORMERLY EX-6187S)

  • MSDS: BWDRW
  • Manufacturer: CASTALL INC
  • Product Name: E-67S (FORMERLY EX-6187S)
  • National Stock Number: 8010-00N056219
Product Identification

Product ID:E-67S (FORMERLY EX-6187S)
MSDS Date:08/16/1990
FSC:8010
NIIN:00N056219
MSDS Number: BWDRW

Responsible Party
CASTALL INC
WEYMOUTH INDUSTRIAL PARK
E. WEYMOUTH, MA 02189
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 617-337-6075

Preparer: ROBERT DAVIS

Cage: DO809

Contractor
CASTALL INC EAST WEYMOUTH INDUSTRIAL PARK
EAST WEYMOUTH, MA 02189-1699 US

Telephone: 617-337-6075

Cage: 29966

Ingredients

PROPANE,1-CHLORO-2,3-EPOXY-; (EPICHLOROHYDRIN) (SARA III)

CAS: 112-57-2

RTECS: KH8585000

Fraction By Weight: 13.5%

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


AMINOETHYLPIPERAZINYLETHYLETHLYENE-DIAMINE

CAS: 31295-46-2

Fraction By Weight: 5.4%

OSHA PEL N/K

ACGIH TLV: N/K


TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 1.2%

OSHA PEL N/K

ACGIH TLV: N/K


6531-38-0.

CAS: 110-85-0

RTECS: TK7800000

Fraction By Weight: 0.3%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT ESTABLISHED AS OF THE CURRENT
ISSUE DATE. THIS PRODUCT IS A SEVERE EYE IRRITANT & IS CORROSIVE TO
THE SKIN. EYE: MAY CAUSE SEVERE IRRITATION W/CORNEAL INJURY WHICH
MAY RESULT IN PERMANENT IMPAIRME NT OF VISION, EVEN BLINDNESS.
SKIN: A SHORT SINGLE EXPOS MAY CAUSE SKIN BURNS, MAY CAUSE ALLERGIC
SKIN(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: REACTION IN SUSCEPTIBLE INDIVIDUALS.
A SINGLE PROLONGED EXPOSURE MAY RESULT IN MATERIAL BEING ABSORBED
IN HARMFUL AMTS. INHAL: EXCESSIVE EXPOSURE MAY CAUSE IRRITATION TO
THE UPPER RESPIRATOR Y TRACT. MAY CAUSE RESPIRATORY SENSITIZATION
OR ASTHMA IN SUSCEPTIBLE INDIVIDUALS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH W/WATER FOR THIRTY MINUTES, PROMPT MED
CONSULTATION IS ESSENTIAL. SKIN: REMOVE UNCURED PRODUCT W/DRY CLOTH
OR TOWEL, WASH THORO W/SOAP & WATER. CONSULT MD IF IRRIT DEVELOPS.
DO NOT USE A S OLVENT TO REMOVE PRODUCT. INHAL: REMOVETO FRESH AIR
IF EFTS OCCUR. CONSULT MD. INGEST: DO NOT INDUCE VOMITING. GIVE LGE
AMTS OF WATER/MILK IF AVAILABLE & TRANSPORT TO MEDICAL FACILITY.

Fire Fighting

Flash Point Method:COC
Flash Point:203F,95C
Extinguishing Media:MOST STANDARD FIREFIGHTING AGENTS ARE SUITABLE.
I.E., SAND, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:DURING A FIRE, IRRITATING &/TOXIC GASES
MAY BE PRESENT FROM THE DECOMPOSITION/COMBUSTION PRODUCTS.

Accidental Release

Spill Release Procedures:COVER SPILLS W/DRY ABSORBENT MATERIAL SUCH AS
SAND OR SAWDUST; SCOOP UP & PLACE IN AN APPROPRIATE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN DRY AREA AWAY FROM EXCESSIVE
HEAT. GROUND ALL TRANFER EQUIPMENT. HOLD BULK STOR UNDER NITROGEN
BLANKET.
Other Precautions:THIS PRODUCT SHOULD NOT COME IN CONTACT W/COPPER OR
COPPER-BEARING ALLOYS. STORAGE TEMP: AMBIENT/80F(27C). AVERAGE
SHELF LIFE: 12 MONTHS IN ORIGINAL SEALED CONTAINERS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN.
Ventilation:USE ONLY W/ADEQUATE VENTILATION. LOCAL EXHAUST VENTILATION
MAY BE NECESSARY FOR SOME OPERATIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:USE PROT CLTHG IMPERVIOUS TO MATL. SELECTION
OF SPECIFIC ITEMS SUCH AS GLOVES, BOOTS, APRON, OR FULL-BODY SUIT
(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PROT EQUIP: WILL DEPEND UPON THE OPERATION. A SAFETY SHOWER
SHOULD BE LOCATED IN THE IMMEDIATE WORK AREA. REMOVE CONTAMD CLTHG
IMMEDIATELY, WASH SKIN AREA W/SOAP & WATER & LAUNDER CLTHG SEPARATE
LY BEFORE REUSE.

Chemical Properties

Boiling Pt:B.P. Text:378F,192C
Spec Gravity:0.99
Appearance and Odor:PALE YELLOW LIQUID W/AMINE ODOR.
Percent Volatiles by Volume:75

Stability

Stability Indicator/Materials to Avoid:YES
ACID, OXIDIZING MATERIALS, HALOGENATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION WILL PRODUCE
NITROGEN OXIDES WHEN BURNED.

Disposal

Waste Disposal Methods:LANDFILL OR INCINERATE UNDER CONDITIONS WHICH
MEET LOCAL, STATE & FEDERAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.